GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the rear compartment trim. Refer to Rear Compartment Trim Panel Replacement.

  2. Object Number: 701867  Size: SH
  3. Remove the nuts securing the amplifier to the vehicle.
  4. Disconnect the electrical connectors.
  5. Remove the amplifier from the vehicle.

Installation Procedure


    Object Number: 701867  Size: SH
  1. Connect the electrical connectors.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the amplifier to the studs on the wheel house.
  4. Install the nuts securing the amplifier the vehicle.
  5. Tighten
    Tighten the nuts to 9 N·m (80 lb in).

  6. Reinstall the rear compartment trim. Refer to Rear Compartment Trim Panel Replacement.
  7. Refer to Control Module References for programming and setup information.