Removal Procedure
- Remove the right rear sail panel. Refer to
Sail Panel Replacement
.
- Remove the fasteners (2) securing the amplifier (1) to the sail panel.
- Disconnect the coaxial cable.
- Disconnect the electrical connector.
Installation Procedure
Important: Ensure that the module coaxial cable connectors are pointing away from each other.
- Reconnect the electrical connector.
Notice: Refer to Fastener Notice in the Preface section.
- Install the amplifier (1) to the sail panel using the fasteners (2).
Tighten
Tighten the fasteners to 9 N·m (80 lb in).
- Connect the coaxial cable to the amplifier.
- Reinstall the sail panel trim. Refer to
Sail Panel Replacement
.