Draining Procedure
- Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Clean away any dirt and debris from around the transmission fluid drain plug area.
- Position an appropriate container below the transmission drain plug.
- Remove the transmission fluid drain plug (34) and washer (33). Discard the washer.
- Allow the transmission fluid to drain into the container.
Notice: Refer to Fastener Notice in the Preface section.
- Install the transmission fluid drain plug (34) and a NEW washer (33).
Tighten
Tighten the drain plug to 37 N·m (27 lb ft).
- Remove the container used to catch the used transmission fluid from under the vehicle.
Filling Procedure
- Clean away any dirt and debris from the transmission fluid fill plug area.
- Remove the transmission fluid fill plug (79) and washer (33). Discard the washer.
- Fill the transmission to just below the bottom of the fill plug hole with the recommended fluid. Refer to
Lubrication Specifications
.
- Install the transmission fluid fill plug and a NEW washer.
Tighten
Tighten the fill plug to 37 N·m (27 lb ft).
- Lower the vehicle.