For 1990-2009 cars only
Removal Procedure
- Insert a flat-bladed tool under the front edge of the front door switch.
- Push the tool firmly towards the switch to disengage the retainer.
- Lift up on the rear of the switch plate to remove it from the door trim panel.
- Disconnect electrical connectors.
- Remove the appropriate switch from the bezel by disengaging the side snap walls with a small flat-bladed tool.
Installation Procedure
- Snap the switch into the bezel.
- Connect the electrical connectors.
- Install the switch into the door trim panel.
- Engage the rear of the switch to the door panel.
- Press down on the switch plate evenly to engage the retainer.
