GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2007 🢒 CTS 🢒 Preface 🢒 Cautions and Notices 🢒 Clutch Pedal Position Switch Replacement

Removal Procedure
  1. Remove the closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side.
  2. Disconnect the clutch pedal position switch electrical connector.

    3. Object Number: 802893 Size: SH
  3. Push the clutch position switch retaining plate locking tabs (2) toward each other.

    4. Object Number: 802896 Size: SH
  4. Slide the retaining plate (1) past the locking tabs.
  5. Remove the retaining plate (1) from the clutch pedal position switch (2).
  6. Remove the clutch pedal position switch (2) from the clutch master cylinder push rod (3).

Installation Procedure

    Object Number: 802896 Size: SH
  1. Install the clutch pedal position switch (2) to the clutch master cylinder push rod (3).
  2. Install the retaining plate (1) to the clutch pedal position switch (2).

    3. Object Number: 802893 Size: SH
  3. Slide the retaining plate into the locked position until the retaining tabs (1) and the locking tabs (2) are fully engaged.
  4. Connect the clutch pedal position switch electrical connector.
  5. Install the closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side.