Generator Bracket Replacement LY7

1. Turn the ignition OFF.
2. Remove the generator. Refer to Generator Replacement .
3. Remove the coolant inlet pipe lower bolt from the generator bracket.
4. Remove the belt tensioner. Refer to Water Pump and Generator Belt Tensioner Replacement .
5. Remove the generator bracket bolts.
6. Remove the generator bracket.

1. Install the generator bracket.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the generator bracket bolts.

Tighten
Tighten the bolts in the sequence shown.

2.1.	Tighten the generator bracket bolts (1, 2) to 50 N·m (37 lb ft).

2.2.	Tighten the generator bracket bolt (3) to 23 N·m (17 lb ft).

3. Install the belt tensioner. Refer to Water Pump and Generator Belt Tensioner Replacement .
4. Install the coolant inlet pipe lower bolt from the generator bracket.
5. Install the generator. Refer to Generator Replacement .