Removal Procedure
- Place the window in the full up position.
- Remove the door trim panel. Refer to
Front Side Door Trim Panel Replacement
.
- Remove the water deflector.
- Remove the wiring harness from the retainers (1).
- Disconnect the electrical connector (2).
- Remove the screw cover (3).
- Remove the screws (4) from the outer edge of the door and from the inside.
- Remove the front side door lock cover (5) from inside the door.
Installation Procedure
- Install the front side door lock cover (5) to cover the lock.
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws (4) to the outer edge of the door and to the inside.
Tighten
Tighten the screws to 5 N·m (44 lb in).
- Install the screw cover (3).
- Connect the electrical connector (2).
- Install the wiring harness to the retainers (1).
- Install the water deflector.
- Install the door trim panel. Refer to
Front Side Door Trim Panel Replacement
.