Preliminary Procedures

1. Remove the rocker panel molding. Refer to Rocker Panel Molding Replacement .
2. Remove the bumper fascia. Refer to Front Bumper Fascia Replacement .
3. Remove the wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
4. Remove the air inlet grille panel side seal. Refer to Air Inlet Grille Panel Side Seal Replacement .

1

Front Fender Bolt (Qty: 9)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
3 N·m (25 lb in)

2

Front Fender Bolt

Procedure

Open the door to access the bolt.

Tighten
3 N·m (25 lb in)

3

Front Fender Bolt

Tip
The bolt is attached vertical to the fender. Simply loosen the bolt rather than remove it and risk losing it in the plenum.

Tighten
3 N·m (25 lb in)

4

Front Fender

Tip
Peel tape and press in place prior to new fender installation to achieve proper flushness to windshield pillar.