GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 CTS 🢒 Engine 🢒 Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Camshaft Cover Assemble

Camshaft Cover Assemble LLT

Special Tools

    • J 5590 Bearing and Seal Driver
    • J-25254-A Oil Seal Installer

For equivalent regional tools, refer to Special Tools.

Left Camshaft Cover

    Object Number: 1992540 Size: SH
  1. Install the NEW left spark plug shield tube seals using the J 5590 driver  (1) and J-25254-A installer  (2).

    2. Object Number: 1992532 Size: SH
  2. Install the NEW left camshaft cover gasket.

    3. Object Number: 1992531 Size: SH
  3. Install the oil fill cap.

    4. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1992528 Size: SH
  4. Install the fuel injector sight shield cover ballstud and tighten to 10 N·m (89 lb in).

    5. Object Number: 1992526 Size: SH

    Note: The camshaft cover bolt grommet must be installed into the camshaft cover bolt hole before installing the camshaft cover bolt.

  5. Install the NEW left camshaft cover bolt grommets.

Right Camshaft Cover

    Object Number: 1836411 Size: SH
  1. Install the NEW right spark plug shield tube coil seals using the J 5590 driver  (1) and J-25254-A installer  (2).

    2. Object Number: 1833744 Size: SH
  2. Install the NEW right camshaft cover gasket.

    3. Object Number: 1836419 Size: SH

    Note: The camshaft cover bolt grommet must be installed into the camshaft cover bolt hole before installing the camshaft cover bolt.

  3. Install the NEW right camshaft cover bolt grommets.

Camshaft Cover Assemble LY7/LP1

Special Tools

    • J 5590 Bearing and Seal Driver
    • J-25254-A Oil Seal Installer
        For equivalent regional tools, refer to Special Tools.

Left Camshaft Cover

    Object Number: 1864463 Size: SH
  1. Install the NEW left spark plug shield tube seals using the J 5590 driver  (1) and J-25254-A installer  (2).

    2. Object Number: 1864448 Size: SH
  2. Install the NEW left camshaft cover gasket.

    3. Object Number: 1871077 Size: SH
  3. Install the oil fill cap.

    4. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1871076 Size: SH
  4. Install the fuel injector sight shield cover ballstud and tighten to 10 N·m (89 lb in).

    5. Object Number: 1871078 Size: SH

    Note: The camshaft cover bolt grommet must be installed into the camshaft cover bolt hole before installing the camshaft cover bolt.

  5. Install the NEW left camshaft cover bolt grommets.

Right Camshaft Cover

    Object Number: 1836411 Size: SH
  1. Install the NEW right spark plug shield tube coil seals using the J 5590 driver  (1) and J-25254-A installer  (2).

    2. Object Number: 1833744 Size: SH
  2. Install the NEW right camshaft cover gasket.

    3. Object Number: 1836419 Size: SH

    Note: The camshaft cover bolt grommet must be installed into the camshaft cover bolt hole before installing the camshaft cover bolt.

  3. Install the NEW right camshaft cover bolt grommets.