Preliminary Procedures

1. Discharge the air conditioning (A/C) system. Refer to Refrigerant Recovery and Recharging.
2. Remove the tower brace. Refer to Cross Vehicle Brace Replacement.
3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
4. Remove the suction hose from the A/C compressor. Refer to Suction Hose Replacement.
5. Position the hose aside to gain access to the engine mount top nut.
6. Lower the vehicle.

1

Engine Mount Fastener

Caution: Refer to Component Fastener Tightening Caution in the Preface section.

Procedure

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Position a screw jack and a block of wood under the engine oil pan.

Tighten
100 N·m (74 lb ft)

2

Engine Mount Fastener

Procedure

The engine mount nuts must be replaced once loosened or removed.

Tighten
100 N·m (74 lb ft)

3

Engine Mount

Procedure

1. Using the screw jack, raise the engine enough to remove the engine mount.
2. Install the new right and left engine mount lower nut first.