Special Tools

EN 48898 Supercharger Lift Fixture

For equivalent regional tools, refer to Special Tools

Note: 

•	The supercharger, throttle body, fuel injection rail and fuel injectors may be removed as an assembly. If not servicing the individual components, remove the supercharger as an assembly.

•	Cover the inlet area of the supercharger (1) to prevent dirt or debris contamination onto the rotors.

1. Remove the positive crankcase ventilation (PCV) - dirty air hose (1) from the valley cover and supercharger.



2. Remove the supercharger cover bolts (1) and the supercharger cover (2).
3. Remove the supercharger cover seal (3).



4. Remove the charge air cooler insulator (1).



5. Cover the supercharger rotors area (1) to prevent dirt or debris contamination onto the rotors.



6. Remove the supercharger bolts (1).



7. Install the EN 48898 fixture to the supercharger (1) and tighten the EN 48898 fixture studs and nuts until snug.
8. Using a lifting device, remove the supercharger from the engine.