For 1990-2009 cars only
Electronic Brake Control Module Programming and Setup for Cadillac CTS 2009
EBCM Replacement
If the electronic brake control module (EBCM) is replaced, the following procedures must be performed:
| • | EBCM Reprogramming--Refer to Service Programming System (SPS) . |
| • | Recalibrate the brake pedal position (BPP) sensor (Without JL7). Refer to Brake Pedal Position Sensor Replacement . |
| • | Recalibrate the steering angle position sensor (Without JL7). Refer to Steering Angle Sensor Centering . |
| • | Recalibrate the yaw rate sensor (Without JL7). |
