Preliminary Procedures

1. Remove the sight shield. Refer to Front Compartment Side Sight Shield Replacement.
2. Remove the air cleaner duct. Refer to Air Cleaner Resonator Outlet Duct Replacement.
3. Disconnect the MAF/IAT sensor electrical connector.

1

Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
9 N·m (80 lb in)

2

Air Cleaner Assembly

Procedure

1. Disconnect the electrical connector.
2. Tilt the assembly rear upward while disengaging the air cleaner isolator.