Preliminary Procedures

1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement.
2. Remove the front door upper trim. Refer to Front Side Door Garnish Molding Replacement.

1

Outside Rearview Power Mirror Harness Retainer

2

Outside Rearview Power Mirror Nut (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

1. Lower the window to the full down position.
2. Disconnect the power mirror wire harness electrical connector.

Tighten
9 N·m (80 lb in)

3

Outside Rearview Power Mirror

Tip
Pull the wiring harness through the hole in the mirror patch.