Preliminary Procedures

1. Remove the interior trim panel. Refer to Rear Side Door Trim Panel Replacement.
2. Remove the door outside handle housing. Refer to Rear Side Door Outside Handle Housing Replacement.

1

Rear Side Door Lock Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

1. Release the inside handle cable retainers before removing the door lock.
2. Disconnect the door lock electrical connector.

Tighten
10 N·m (89 lb in)

2

Rear Inside Door Handle Cable

3

Rear Side Door Lock Assembly

Procedures

Transfer the lock rods.