Preliminary Procedure

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

1

Fuel Pressure Sensor

Caution: Refer to Fastener Caution in the Preface section.

Procedure

1. Lubricate a NEW fuel pressure sensor O-ring seal with clean engine oil.
2. Install the NEW fuel pressure sensor O-ring seal (2) onto the fuel line fitting.
3. Wrap a shop towel around the fuel pressure sensor fitting in order to absorb any fuel that may leak out.

Tip
The fuel pressure sensor is located in the fuel pipe to the right of the fuel tank.

Tighten
10 N·m (89 lb in)