For 1990-2009 cars only
Special Tools
| • | J 45845 Caster and Camber Adjusting Tool |
| • | J 45845-10 Caster and Camber Adjusting Rod |
- Position the J 45845 tool and the J 45845-10 rod on the lower control arm to the frame.
- Loosen the lower control arm to frame bolt.
- Using the J 45845 tool and the J 45845-10 rod , adjust the camber angle until the specifications have been met and tighten the bolt to 165 N·m (122 lb ft).
- Verify that the camber is still with specifications. Refer to Wheel Alignment Specifications.
- Adjust the rear toe. Refer to Rear Toe Adjustment.
Caution: Refer to Fastener Caution in the Preface section.
