Note: Service the exhaust hangers individually in order to retain the support of the exhaust system.

Warning: Refer to Protective Goggles and Glove Warning in the Preface section.

Warning: Refer to Exhaust Service Warning in the Preface section.

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.



2. Apply a non petroleum based lubricant to the insulators and the hanger rods to aid in removal.
3. Remove the muffler insulator (1) from the rear suspension hanger rod (2).
4. Remove the muffler insulator (1) from the muffler hanger rod (3).



5. Remove the tail pipe insulators (2)  from the body support hanger rods (1).
6. Remove the tail pipe insulators (2)  from the muffler hanger rods (3).

1. Apply a non petroleum based lubricant to the insulators and the hanger rods to aid in installation.
2. Install the tail pipe insulators (2) to the tail pipe hanger rods (3).
3. Install the tail pipe insulators (2) over the body support bracket rods (1).



4. Install the muffler insulator (1) to the muffler hanger rod (3).
5. Install the muffler insulator (1) to the rear suspension hanger rod (2).
6. Inspect for underbody clearance and tail pipe alignment.