Preliminary Procedures

1. Thoroughly clean the torque converter housing assembly, including threads, with clean solvent.
2. Clean sealing surfaces.
3. Inspect all threaded holes. If necessary, repair any thread damage.

1

Line Pressure Test Hole Plug

2

A/Trans Vent Pipe

3

Trans Fluid Cooler Pipe Fitting Seals (Qty: 2)

Caution: Refer to Seal Reuse Caution in the Preface section.

Tip
Refer to Transmission Fluid Cooler Pipe Seal Replacement.

4

Torque Converter Bushing