1

Fluid Pan Gasket

Tip
The fluid pan gasket is reusable. Inspect the gasket to determine if it may be reused. If the gasket is stuck to the case or pan, it should be replaced.

2

Fluid Pan Assembly

3

Fluid Pan Bolts M6 x 20 (Qty: 18)

Caution: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Procedure

Tighten in sequence shown.

Tighten
9 N·m (80 lb in)

1

Fluid Pan Gasket

Tip
The fluid pan gasket is reusable. Inspect the gasket to determine if it may be reused. If the gasket is stuck to the case or pan, it should be replaced.

2

Fluid Pan Assembly

3

Fluid Pan Bolts M6 x 20 (Qty: 17)

Caution: Refer to Fastener Caution in the Preface section.

Procedure:

Tighten in sequence shown.

Tighten
9 N·m (80 lb in)