Propeller Shaft Transmission Flange Installation. Cadillac CTS 2009

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2009 🢒 CTS 🢒 Transmission 🢒 Automatic Transmission - 6L50/6L80/6L90 🢒 Propeller Shaft Transmission Flange Installation

Propeller Shaft Transmission Flange Installation 6L90

Callout	Component Name
1	Front Prop Shaft Flange
2	Prop Shaft Bolt Caution: Refer to Fastener Caution in the Preface section. Tighten 105 N·m (77 lb ft). Special Tool J 45012 Holding Fixture For equivalent regional tools, refer to Special Tools.

Callout

Component Name

Front Prop Shaft Flange

Prop Shaft Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
105 N·m (77 lb ft).

Special Tool

J 45012 Holding Fixture

For equivalent regional tools, refer to Special Tools.

Propeller Shaft Transmission Flange Installation 6L50

Callout	Component Name
1	Prop Shaft Trans Flange
2	NEW Front Prop Shaft Flange Nut Caution: Refer to Fastener Caution in the Preface section. Tighten 105 N·m (77 lb ft). Special Tool J 45012 Holding Fixture For equivalent regional tools, refer to Special Tools.
3	Output Shaft Caution: Stake the flange nut onto the output shaft. Use the two staking grooves on the shaft to locate the staking points. Failure to stake the flange nut may result in damage to the transmission.

Callout

Component Name

Prop Shaft Trans Flange

NEW Front Prop Shaft Flange Nut

Caution: Refer to Fastener Caution in the Preface section.

Tighten
105 N·m (77 lb ft).

Special Tool

J 45012 Holding Fixture

For equivalent regional tools, refer to Special Tools.

Output Shaft

Caution: Stake the flange nut onto the output shaft. Use the two staking grooves on the shaft to locate the staking points. Failure to stake the flange nut may result in damage to the transmission.