For 1990-2009 cars only
Special Tools
| • | DT-47722 Shift Rail Bushing Remover and Installer |
| • | DT-47724 Output Shaft Bearing Cup Installer |
| • | J 36614 Inner Pinion Bearing Installer |
| • | J 44765 Seal Installer |
- Using DT-47724 (2) and J 36614 (1), install the tapered bearing race (89).
- Apply gear oil and install the tapered roller bearing (89).
- Using J 44765 , install a NEW rear output shaft oil seal (92).
- Using DT-47722 , install a NEW shift shaft seal (88) to the specified depth (a).
Important: Ensure that the extension housing installation surfaces are clean.
Depth
Drive the shift shaft seal to a depth of 4.6-5.4 mm below the surface of the extension housing.
