Special Tools
| • | J 22912-B Rear Pinion and Axle Bearing Remover
|
| • | J 39473 Mainshaft Bearing Installer
|
For equivalent regional tools, refer to
Special Tools.
Note: Do not replace tapered bearings unless inspection shows bearing damage.
- Remove the small tapered bearing, using the
J 22912-B remover
(1) with the
J 39473 installer
(2) and a hydraulic press.
- Discard the small tapered bearing.
- Remove the large tapered bearing, using the
J 39511 plate
(2), the
J 39547 adapter
(1) and a hydraulic press.
- Discard the large tapered bearing.
