For 1990-2009 cars only
Removal Procedure
- Remove the shift control knob/ boot assembly. Refer to Transmission Control Lever Knob Replacement.
- Remove the sound insulator foam block from the console.
- Remove the electrical connector (1) from the shift control adaptor plate (2).
- Position the electrical connector (1) out of the way.
- Remove the 2 bolts (2) attaching the shift control assembly to the shift control adaptor plate.
- Remove the 4 nuts (1) securing the shift control adaptor plate to the tunnel reinforcement.
- Remove the shift control boot and adaptor plate assembly from the vehicle.
Installation Procedure
- Install the shift control boot and adaptor plate assembly to the vehicle.
- Install the 4 nuts (1) securing the shift control adaptor plate to the tunnel reinforcement and tighten the nuts to 12 N·m (106 lb in).
- Lift up on the shift control lever to bring the shift control assembly in contact with the shift control adaptor plate.
- Install the 2 bolts (2) securing the shift control assembly to the shift control adaptor plate and tighten the bolts to 18 N·m (13 lb ft).
- Install the electrical connector (1) to the shift control adaptor plate (2).
- Install the sound insulator foam block into the console.
- Install the shift control knob/ boot assembly. Refer to Transmission Control Lever Knob Replacement.
Caution: Refer to Fastener Caution in the Preface section.
