For 1990-2009 cars only
Removal Procedure
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
- Remove the propeller shaft. Refer to Rear Propeller Shaft Replacement.
- Support the transmission with a suitable jack.
- Remove the transmission support. Refer to Transmission Support Replacement.
- Lower the jack to gain access to the top of the transmission.
- Remove the bolt (1) securing the vent hose to the transmission.
- Remove the vent hose (2) from the vent pipe.
Installation Procedure
- Install the vent hose (2) to the vent pipe.
- Install the shift guide plate bolt securing the vent hose (1) to the transmission and tighten the bolt to 22 N·m (16 lb ft).
- Raise the jack.
- Install the transmission support. Refer to Transmission Support Replacement.
- Remove the jack.
- Install the propeller shaft. Refer to Rear Propeller Shaft Replacement.
- Lower the vehicle.
Caution: Refer to Fastener Caution in the Preface section.
