1

Front Side Door Nameplate

Caution: Refer to Exterior Trim Emblem Removal Caution in the Preface section.

Procedure

1. The part and surface should be 21°C (70°F) prior to installation. The vehicle should remain 21°C (70°F) for one hour after assembly to allow adhesive to develop sufficient bond strength.
2. Use a J 25070 Heat Gun or equivalent to remove the old nameplate.
3. Clean all adhesive from the bodyside door panel and wipe the surface dry with a clean lint-free towel prior to installing the new name plate.
4. Close the door prior to installing the new nameplate.
5. When removing protective liners from the adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
6. Position and adhere the nameplate to the door.
7. Using the palm of the hand, wet out the name plate on the bodyside door panel to ensure full adhesion of the name plate is made.