Front-to-Rear, Side-to-Side
- Loosen the fasteners securing the rear compartment lid to the rear compartment lid hinges.
- Align the rear compartment lid in order to achieve an equal 3 mm (1/8 mm) gap around the entire perimeter of the rear compartment lid.
Caution: Refer to Fastener Caution in the Preface section.
- Tighten the hinge fasteners to
25 N·m (18 lb ft).
Up and Down Adjustment
- Loosen the fasteners securing the rear compartment lid hinge to the vehicle body.
- Move the rear compartment lid in order to adjust it to a flush fit with the vehicle quarter panels.
- Tighten the fasteners to
25 N·m (18 lb ft) in order to secure the rear compartment lid hinge to the vehicle body.
- Close the rear compartment.
- Adjusting the rear compartment overslam bumpers may be necessary.