Preliminary Procedure

Remove the check link bolt from the body side only . Refer to Rear Side Door Check Link Replacement .

1

Rear Side Door Upper Auxiliary Weatherstrip Retainer (Qty :17)

Procedure

1. Open the front side door to the fully open position.
2. Use a suitable tool to remove the retainers from around the lower door.

•	Pull rearward on the weatherstrip, use the tool to release the push in pin retainer.

•	Remove all old push-in pins retainer.

2

Rear Side Door Upper Auxiliary Weatherstrip Retainer

Procedure

1. The weatherstrip clips to a weld-on retainer at the top of the door frame (2).
2. Pull rearward on the weatherstrip to expose the weld-on retainer located on the top of the door frame.

3

Rear Side Door Upper Auxiliary Weatherstrip

Procedure

1. Ensure that the auxiliary weatherstrip is fully seated in the upper door frame channel.
2. Verify proper door operation.