Preliminary Procedures

1. Remove the rocker panel molding. Refer to Rocker Panel Molding Replacement.
2. Remove the bumper fascia. Refer to Front Bumper Fascia Replacement.
3. Remove the wheelhouse liner. Refer to Front Wheelhouse Liner Replacement.
4. Remove the air inlet grille panel side seal. Refer to Air Inlet Grille Panel Side Seal Replacement.

1

Front Fender Bolt (Qty: 9)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
3 N·m (25 lb in)

2

Front Fender Bolt

Procedure

Open the door to access the bolt.

Tighten
3 N·m (25 lb in)

3

Front Fender Bolt

Tip
The bolt is attached vertical to the fender. Simply loosen the bolt rather than remove it and risk losing it in the plenum.

Tighten
3 N·m (25 lb in)

4

Front Fender

Tip
Peel tape and press in place prior to new fender installation to achieve proper flushness to windshield pillar.