Preliminary Procedures

1. Remove the front wheelhouse extension. Refer to Wheelhouse Extension Replacement.
2. Remove the front bumper air deflector. Refer to Front Bumper Fascia Air Deflector Replacement.
3. Disconnect the headlamp washer hose from the fascia.
4. Remove the front compartment sight shields. Refer to Front Compartment Sight Shields Replacement.

1

Front Bumper Fascia Plastic Retainer (Qty: 4)

2

Front Bumper Fascia Bolt (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tip
Reach underneath the wheelhouse to access the bolts.

Tighten
2 N·m (18 lb in)

3

Front Bumper Fascia

Procedure

1. Pull forward to remove the front bumper fascia.
2. Disconnect any electrical connectors.
3. Transfer parts as needed.