Preliminary Procedures

1. Remove the right and left rear wheelhouse. Refer to Rear Wheelhouse Panel Liner Replacement.
2. Remove the rear fog lamp assembly. Refer to Rear Fog Lamp Replacement.
3. Remove the tire pressure indicator receiver. Refer to Tire Pressure Indicator Receiver Replacement.

1

Rear Bumper Fascia Push Pin (Qty: 3)

2

Rear Bumper Fascia Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

3

Rear Bumper Fascia

Procedure

1. Disconnect the electrical connectors/harnesses as needed.
2. Transfer any parts as needed.