GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2003 🢒 CTS - RHD 🢒 Engine 🢒 Engine Electrical 🢒 Battery Tray Replacement

Battery Tray Replacement LHD

Removal Procedure
  1. Remove the battery. Refer to Battery Replacement .
  2. Remove the right air inlet grill panel only. Refer to Air Inlet Grille Panel Replacement in Body Front End.

    3. Object Number: 799787 Size: SH
  3. Remove the 2 bolts securing the front air inlet panel assembly to the battery tray.

    4. Object Number: 776848 Size: SH
  4. Remove the battery tray bolts from the following:
    5. • The inner fender panel
    • The shock tower
    • The lower air inlet panel assembly
  5. Remove the battery tray (2) from the vehicle.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 776848 Size: SH
  1. Position the battery tray (2) to the vehicle, locating the alignment datums (1) with the holes in the inner fender.
  2. Install the battery tray bolts to the following:
    3. • The inner fender panel
    • The shock tower
    • The lower air inlet panel assembly

    Tighten
    Tighten the battery tray bolts to 6 N·m (53 lb in).


    Object Number: 799787 Size: SH
  3. Install the 2 bolts securing the front air inlet panel assembly to the battery tray.

    4. Tighten
    Tighten the front air inlet panel assembly bolts to 6 N·m (53 lb in).

  4. Install the right air inlet grill panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  5. Install the battery. Refer to Battery Replacement .

Battery Tray Replacement RHD

Removal Procedure
  1. Remove the battery. Refer to Battery Replacement .
  2. Remove the left air inlet grill panel only. Refer to Air Inlet Grille Panel Replacement in Body Front End.

    3. Object Number: 799789 Size: SH
  3. Remove the 2 bolts securing the front air inlet panel assembly to the battery tray.

    4. Object Number: 776849 Size: SH
  4. Remove the battery tray bolts from the following:
    5. • The inner fender panel
    • The shock tower
    • The lower air inlet panel assembly
  5. Remove the battery tray (1) from the vehicle.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 776849 Size: SH
  1. Position the battery tray (1) to the vehicle, locating the alignment datums (2) with the holes in the inner fender.
  2. Install the battery tray bolts to the following:
    3. • The inner fender panel
    • The shock tower
    • The lower air inlet panel assembly

    Tighten
    Tighten the battery tray bolts to 6 N·m (53 lb in).


    Object Number: 799789 Size: SH
  3. Install the 2 bolts securing the front air inlet panel assembly to the battery tray.

    4. Tighten
    Tighten the front air inlet panel assembly bolts to 6 N·m (53 lb in).

  4. Install the left air inlet grill panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  5. Install the battery. Refer to Battery Replacement .