Table 1: | Dash Integration Module (DIM) |
Table 2: | Engine Control Module (ECM) |
Table 3: | Vehicle Theft Deterrent (VTD) |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
---|---|---|---|
Engine Running | |||
Battery Voltage | Data | Volts | 13.9 Volts |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
---|---|---|---|
Key ON, Engine OFF/Transmission in Park or Neutral/Clutch Depressed | |||
Battery Voltage | Engine Data 1, 2, 3 | Volts | 13.9 Volts |
Clutch Start Switch | Engine Data 3 | On/Off | On |
Crank Request | Engine Data 3 | Yes/No | No |
GEN L - Terminal Signal Command | Engine Data 2 | On/Off | On |
Gen F - Terminal Signal | Engine Data 2 | 0 - 100% | 74% |
PNP Switch | Engine Data 2 | P-N/R-D-L | P-N |
Starter Motor Status | Engine Data 3 | Turning/Not Turning | Not Turning |
Starter Relay Command | Engine Data 3 | On/Off | Off |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
---|---|---|---|
Engine Running | |||
Battery Charger | Data | On/Off | Off |
Battery State | Data | Low Voltage/Normal/High Voltage | Normal |
Battery Voltage | Data | Volts | 13.9 Volts |
Start Disabled | Data | Yes/No | No |