Tools Required

J 43276 Clutch Pilot Bearing Remover

Caution: Refer to Safety Glasses Caution in the Preface section.





Notice: When using the J 43276 Clutch Pilot Bearing Remover, always secure the J 43276-1 Clutch Pilot Bearing Remover tool body using a wrench. Do not allow the J 43276-1 tool body to rotate. Failing to do so causes damage to the J 43276-1 tool body.

1. Remove the clutch pilot bearing using the J 43276 .

1.1.	Install the J 43276-1 tool body into the clutch pilot bearing.

1.2.	Using a wrench secure the J 43276-1 tool body.

1.3.	Insert the J 43276-2 forcing screw into the J 43276-1 tool body.

1.4.	Rotate the J 43276-2 forcing screw clockwise into the J 43276-1 tool body until the clutch pilot bearing is completely removed from the crankshaft.

1.5.	Rotate the J 43276-2 forcing screw counterclockwise to remove the J 43276-2 forcing screw from the J 43276-1 tool body.

1.6.	Remove the J 43276-1 tool body from the clutch pilot bearing.

2. Discard the clutch pilot bearing.