GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2003 🢒 CTS - RHD 🢒 Engine 🢒 Engine Mechanical - 2.6L and 3.2L 🢒 Engine Support Fixture

Tools Required

    • J 28467-B Universal Engine Support Fixture
    • J 28467-501 Engine Support Fixture Adapters

Installation Procedure

    Object Number: 790666 Size: SH
  1. Loosely install the J 28467-501  (1) to the ends of the strut tower tube J 28467-3 (2).

    2. Object Number: 790668 Size: SH
  2. Place the strut tower tube J 28467-3 and the J 28467-501 on top of both the left and right fender lips, over the engine rear lift bracket.

    3. Object Number: 790672 Size: SH
  3. Install the radiator shelf tube J 28467-2A (2) on top of the strut tower tube J 28467-3 (1) over the engine front lift bracket.

    4. Object Number: 405958 Size: SH
  4. Install the round tube of the front support assembly J 28467-4A through the large hole in the radiator shelf tube J 28467-2A. The hole used in the radiator shelf tube J 28467-2A depends on the vehicle application.
  5. Place the rubber padded foot of the front support assembly J 28467-4A on the upper tie bar.
  6. Install the 7/16 in x 2.0 in quick release pin J 28467-9 through the hole in the front support assembly J 28467-4A in order to level the radiator shelf tube J 28467-2A.

    7. Object Number: 287864 Size: SH
  7. Install the cross bracket assembly J 28467-1A.
  8. Hand tighten the cross bracket assembly J 28467-1A wing nuts.

    9. Object Number: 682139 Size: SH
  9. Install the lift hook J 28467-7A through the lift hook bracket J 28467-6A.
  10. Install the 1/2 in lift hook washer and lift hook wing nut J 28467-34 onto the lift hook J 28467-7A.

    11. Object Number: 682301 Size: SH
  11. Install the assembled lift hook bracket J 28467-6A (1) over the strut tower tube J 28467-3 (2).
  12. Adjust the assembled lift hook bracket J 28467-6A (1) in order to align the hook with the engine rear lift bracket.

    13. Object Number: 790674 Size: SH
  13. Install the lift hook J 28467-7A through the engine rear lift bracket. Ensure the hook does not damage the surrounding components.
  14. Repeat steps 9 and 10.

    15. Object Number: 682301 Size: SH
  15. Install the assembled lift hook bracket J 28467-6A (1) over the radiator shelf tube J 28467-2A (2).
  16. Adjust the assembled lift hook bracket J 28467-6A (1) in order to align the hook with the engine front lift bracket.

    17. Object Number: 790676 Size: SH
  17. Install the lift hook J 28467-7A through the engine front lift bracket. Ensure the hook does not damage the surrounding components.

    18. Object Number: 790677 Size: SH
  18. Hand tighten the lift hook wing nuts J 28467-34 securely to remove all slack from the engine support fixture assembly.

Removal Procedure

    Object Number: 790677 Size: SH
  1. Remove the J 28467-B .
  2. Remove the J 28467-501 .