- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Clean any dirt from around the fluid fill plug (1).
- Remove the transmission fluid fill plug and washer (1).
- Check that the transmission fluid level
is even with the bottom of the fill plug hole.
- Add DEXRON®-III transmission fluid, if necessary.
Notice: Refer to Component Fastener Tightening Notice in the Preface section.
- Install the transmission fluid fill plug and washer (1)
Tighten
Tighten the plug to 35 N·m (26 lb ft).
- Lower the vehicle.