GM Service Manual Online
For 1990-2009 cars only

Draining Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Clean away all dirt and debris from the transmission fluid drain plug area.

  3. Object Number: 779334  Size: SH
  4. Remove the transmission fluid drain plug and washer.
  5. Allow the transmission fluid to drain into an appropriate container for proper disposal.
  6. Clean away all dirt and debris from the drain plug magnet.
  7. Notice: Refer to Component Fastener Tightening Notice in the Preface section.


    Object Number: 779334  Size: SH
  8. Install the transmission fluid drain plug and washer.
  9. Tighten
    Tighten the plug to 35 N·m (26 lb ft).

Filling Procedure

  1. Clean away all dirt and debris from the transmission fluid fill plug area.

  2. Object Number: 779331  Size: SH
  3. Remove the fill plug and washer (1).

  4. Object Number: 2327  Size: SH
  5. Fill the transmission with DEXRON®-III transmission fluid, until even with the bottom of the fill plug hole.

  6. Object Number: 779331  Size: SH
  7. Install the transmission fluid fill plug and washer (1).
  8. Tighten
    Tighten the plug to 35 N·m (26 lb ft).

  9. Lower the vehicle.