Removal Procedure
- Remove the shift control boot. Refer to
Floor Shift Control Boot Replacement
.
- Remove the center console assembly. Refer to
Front Floor Console Replacement
in Instrument Panel, Gages and
Console.
- Disconnect the wiring harness connector (1)
from the shift lock control pigtail connector (2).
- Slide the pigtail connector (2) off of the retainer (3).
- Remove the pigtail harness from the wire retainer (4).
- Remove the three shift
lock actuator attaching screws (1).
- Remove the shift lock actuator (2) from the shift control
assembly.
Installation Procedure
- Install the shift lock
actuator (2) to the shift control assembly.
- Install the three shift lock actuator attaching screws (1).
- Slide the pigtail connector (2)
onto the retainer (3).
- Connect the wiring harness connector (1) to the shift lock
control pigtail connector (2).
- Install the pigtail harness into the wire retainer (4).
- Install the center console assembly. Refer to
Front Floor Console Replacement
in Instrument Panel, Gages and
Console.
- Install the shift control boot. Refer to
Floor Shift Control Boot Replacement
.