Blower Motor Control Processor Replacement LHD

1. Remove the right sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gages, and Console.



2. Disconnect the electrical connector from the blower motor control processor.



3. Remove the blower motor control processor retaining screw (1).
4. Remove the blower motor control processor from the vehicle.

1. Install the blower motor control processor.

Notice: Refer to Fastener Notice in the Preface section.




2. Install the blower motor control processor retaining screw (1).

Tighten
Tighten the screw to 1 N·m (9 lb in).




3. Connect the electrical connector to the blower motor control processor.
4. Install the right sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gages, and Console.

Blower Motor Control Processor Replacement RHD

1. Remove the left closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages, and Console.



2. Disconnect the electrical connector (1) from the blower motor control processor.



3. Remove the blower motor control processor retaining screw (1).



4. Remove the blower motor control processor from the vehicle.

1. Install the blower motor control processor.

Notice: Refer to Fastener Notice in the Preface section.




2. Install the blower motor control processor retaining screw (1).

Tighten
Tighten the screw to 1 N·m (9 lb in).




3. Connect the electrical connectors (1) to the blower motor control processor.
4. Install the left closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages, and Console.