Step | Action | Yes | No |
---|---|---|---|
Schematic Reference: Seat Belt Schematics | |||
1 | Did you review the Seat Belt System Description and Operation and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Seat Belts |
2 |
Does the system operate properly? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Does the scan tool indicate that the Driver Side Belt Status parameter displays Buckled? | Go to Step 4 | Go to Step 5 |
4 | Replace the IPC. Refer to Instrument Cluster Replacement in Instrument Panel, Gages, and Console. Did you complete the replacement? | Go to Step 8 | -- |
5 |
Did you find and correct the condition? | Go to Step 8 | Go to Step 6 |
6 | Test the seat belt switch - left ground circuit for an open or high resistance. Did you find and correct the condition? | Go to Step 8 | Go to Step 7 |
7 | Replace the seat belt switch - LF. Refer to Seat Belt Buckle Pretensioner Replacement . Did you complete the replacement? | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you find and correct the condition? | System OK | Go to Step 3 |