Removal Procedure
- Remove the inside handle bezel from the
inner door panel in the following order:
1.1. | Hold the inside handle (1) to the open position. |
1.2. | Insert a flat-bladed tool at the front lower corner of the bezel. |
1.3. | Pry outward on the bezel. |
1.4. | Remove the bezel from the inner door panel. |
- Disconnect the electrical connector from the lock switch.
Installation Procedure
- Snap the door lock switch into the door switch bezel.
- Connect the electrical connector.
- Slide the bezel over the door handle.
- Snap the bezel into position by pushing
on lower front corner of bezel.