Windshield Wiper Motor Replacement LHD

Tools Required

1. Remove the wiper motor module assembly (1). Refer to Windshield Wiper System Module Replacement .



2. Remove the drive links from the wiper motor crank arm to the wiper motor using the J 39232 .



3. Remove the 3 screws (1) retaining the wiper motor to the wiper motor module.
4. Remove the wiper motor.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

1. Install the wiper motor onto the wiper motor module assembly with the screws (1).

Tighten
Tighten the screws to 10 N·m (89 lb in).




2. Install the drive links onto the wiper motor crank arm using the J 39529 .



3. Install the wiper motor module assembly (1). Refer to Windshield Wiper System Module Replacement .
4. Operate the wipers and check for proper operation.

Windshield Wiper Motor Replacement RHD

Tools Required

1. Remove the wiper motor module assembly (1). Refer to Windshield Wiper System Module Replacement .



2. Remove the drive links from the wiper motor crank arm to the wiper motor using the J 39232 .
3. Remove the 3 screws retaining the wiper motor to the wiper motor module.
4. Remove the wiper motor.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

1. Install the wiper motor onto the wiper motor module assembly with the screws (1).

Tighten
Tighten the screws to 10 N·m (89 lb in).

2. Install the transmission drive links (3) onto the wiper motor crank arm (2) using the J 39529 .



3. Install the wiper motor module assembly (1). Refer to Windshield Wiper System Module Replacement .
4. Operate the wipers and check for proper operation.