GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the defroster grille. Refer to Defroster Grille Replacement in Instrument Panel, Gages and Console.

  2. Object Number: 700912  Size: SH
  3. Remove the fasteners (1) securing the speaker to the I/P retainer.
  4. Disconnect the electrical connector (2).

Installation Procedure


    Object Number: 700912  Size: SH
  1. Connect the electrical connector (2).
  2. Install the speaker (1) to the I/P retainer.
  3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the 4 fasteners securing the speaker.
  5. Tighten
    Tighten the fasteners to 2 N·m (18 lb in).

  6. Reinstall the defroster grille. Refer to Defroster Grille Replacement in Instrument Panel, Gages and Console.