GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2003 🢒 CTS - RHD 🢒 Body and Accessories 🢒 Entertainment 🢒 Steering Wheel Control Switch Assembly Replacement

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.


    Object Number: 754855 Size: SH
  1. Disable the SIR system. Refer to SIR Disabling and Enabling in SIR.
  2. Remove the steering wheel inflatable restraint module. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.
  3. Disconnect the electrical connectors for the steering wheel control switch.

    4. Object Number: 803006 Size: SH
  4. Remove the retaining screws from the steering wheel control switch.
  5. Remove the retainer and screw from the steering wheel control harness.
  6. Carefully pull the control switch assembly away from the steering wheel.
  7. Remove the control switch assembly from the steering wheel.
  8. Remove the wire harness from the control switch assembly.

Installation Procedure
  1. Install the wire harness to the steering wheel control switch assembly.

    2. Object Number: 803005 Size: SH
  2. Align the control switch assembly engagement tabs to the steering wheel.

    3. Push in on the control switch assembly in order to secure the assembly to the steering wheel.

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 803006 Size: SH
  3. Install the control harness retainer and screw.

    4. Tighten
    Tighten the screw to 2.3 N·m (20 lb in).

  4. Install the control switch assembly screws

    5. Tighten
    Tighten the screws to 2.3 N·m (20 lb in).


    Object Number: 754855 Size: SH
  5. Connect the electrical connector to the steering wheel control.
  6. Secure the connector to the retaining clip.
  7. Install the inflatable restraint module. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.
  8. Enable the SIR. Refer to SIR Disabling and Enabling in SIR.