Removal Procedure
Important: Do not swap digital radio receivers between
vehicles. Swapping digital receivers between vehicles will activate the digital radio
Theftlock, "XM Theftlock" will be displayed.
- Remove the rear self panel. Refer to
Rear Window Shelf Trim Panel Replacement
in Interior Trim
- Disconnect the electrical connectors on the receiver.
- Remove the fasteners securing the receiver to the rear shelf carrier.
- Remove the receiver.
Installation Procedure
- Install
the receiver to the rear carrier.
Notice: Refer to Fastener Notice in the Preface section.
- Install the fasteners securing the receiver to the rear carrier.
Tighten
Tighten the fasteners to 2 N·m (17 lb in).
- Connect the electrical connectors.
- Install the rear self panel. Refer to
Rear Window Shelf Trim Panel Replacement
in Interior Trim.
- Perform the setup procedure for the digital radio receiver. Refer to
Digital Radio Receiver Setup
.