Removal Procedure
- Remove the rear shelf trim cover. Refer to
Rear Window Shelf Trim Panel Replacement
.
- Remove the screws securing the global positioning system (GPS) antenna (1) to the electrical carrier.
- Disconnect the GPS antenna harness (3) at the electrical carrier.
Installation Procedure
Important: In order to verify the GPS system is operational, the vehicle must be parked outside for a minimum of five minutes.
- Connect the GPS antenna harness (3) at the electrical carrier.
- Install the screws securing the GPS antenna (1) to the electrical carrier.
- Install the rear shelf trim cover. Refer to
Rear Window Shelf Trim Panel Replacement
.