GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2003 🢒 CTS - RHD 🢒 Body and Accessories 🢒 Body Control System 🢒 Outside Rearview Mirror Motor Replacement

Removal Procedure

    Object Number: 810607 Size: SH
  1. Remove the mirror face. Refer to Outside Rearview Mirror Glass Replacement .
  2. Remove the screws (2).
  3. Disconnect the electrical connector.

Installation Procedure

    Object Number: 810607 Size: SH
  1. Connect the electrical connector.
  2. Align the motor to the mirror assembly.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screws (2).

    4. Tighten
    Tighten the screws (2) to 1 N·m(9 lb in).

  4. Install the mirror face. Refer to Outside Rearview Mirror Glass Replacement .