Schematic Reference: Instrument Cluster Schematics

1

Did you perform the Diagnostic System Check - Instrument Cluster?

--

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

Start the engine.

Does the CHANGE ENGINE OIL message illuminate in the Radio?

--

Go to Step 3

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

1. Install a scan tool.
2. With a scan tool, observe the Engine Oil Life parameter in the engine control module (ECM) instrument panel cluster (IPC) Data list.

Does the Engine Oil Life parameter display 0%?

--

Go to Step 4

Go to Step 5

Reset the engine oil life. Refer to GM Oil Life System Resetting in Maintenance and Lubrication.

Does the CHANGE ENGINE OIL message turn off?

--

Go to Step 6

Go to Step 5

Replace the radio. Refer to Radio Replacement in Entertainment.

Did you complete the replacement?

--

Go to Step 6

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 2