GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2003 🢒 CTS - RHD 🢒 Body and Accessories 🢒 Body Front End 🢒 Hood Open Assist Rod Stud Replacement

Removal Procedure
  1. Open and support the hood.

    2. Object Number: 130509 Size: SH
  2. Remove the assist rod. Refer to Hood Open Assist Rod Replacement .
  3. Remove the lower hood assist rod ball stud (1) from the fender (2).

    4. Object Number: 105286 Size: SH
  4. Remove the upper hood assist rod ball stud (2) from the hood (1).

Installation Procedure

    Object Number: 105286 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the upper assist rod ball stud (2) to the hood (1).

    2. Tighten
    Tighten the upper hood assist rod ball stud (2) to 9 N·m (80 lb in).


    Object Number: 130509 Size: SH
  2. Install lower ball stud (1) to the fender (2).

    3. Tighten
    Tighten the lower hood assist rod ball stud (1) to 9 N·m (80 lb in).

  3. Install assist rod. Refer to Hood Open Assist Rod Replacement .