GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Pull back the forward half of the water deflector from the door panel to access the check link. Refer to Front Side Door Water Deflector Replacement .

  3. Object Number: 759947  Size: SH
  4. Remove the door check link to body bolt.
  5. Remove the check link to door nuts (1).
  6. Remove the check link from the door.

Installation Procedure


    Object Number: 759947  Size: SH
  1. Install the check link into the door.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the check link nuts (1).
  4. Tighten
    Tighten the nuts to 9 N·m (80 lb in).

  5. Install the check link arm to front body hinge pillar bolt.
  6. Tighten
    Tighten the check link arm bolt to 9 N·m (80 lb in).

  7. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  8. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .